Code to see Mobile Number

-
Some new networks allow to retrieve the mobile number (MSISDN) from the network.
You can use this facility to know the mobile number of ur unknown SIM card(if u have lot of SIMs)that u had forgotten for long time and now just found it in your old purse.
These codes worked for me.

*1#
*7#

I have tried almost all networks of which airtel and idea didnt reponded.
Add if any similar code worked for u...

An update : *789# for idea

Comments

Unknown said…
Actually i tried it wit mi Docomo network n itz not working
December 4, 2010 at 8:08 PM
Post a Comment

Popular posts from this blog

DIY Fixing a Laptop Battery

-
Image
Hi Friends ,  DIY is always fun and awesome, and so welcome to another word of tech byte... This note is a collective scratchpad of troubleshoot methods and fixes i came across recently for fixing my laptop battery that went bad. Battery Model   : HP HS04  battery pack (4 cell , lithium ion, 14.6V , 2670 mAh, 41 Wh) Laptop  Model  : HP 15-ac635tu   (equivalent to HP G4 250 Notebook) The Symptoms Laptop Showed 1. Laptop charger goes on and off intermittently after charging up to more than 60% . The charger port LED goes between charging and not-charging frequently. 2. Once laptop is running from battery, charge percentage drops faster than normal, and once it reaches 23% , laptop shuts off immediately. On power in on again the charge percentage will be less than 15% and wont complete bootup to desktop. Faints instantly. Troubleshooting 1. Borrowed a laptop charger from my friend and tried 2 or 3 charge cycles. But still the issue...
Read more

Bidirectional 3.3v 5v Level Shifter

-
Image
Hi guys.. welcome to another simple DIY project... Lets make a level shifter, which will just shift a 5v data line to 3.3v or vice versa... Okie why we need such a shifter..  ? or what is this stuff actually.... ? We run around huge bunch of devices that run in various voltage levels.. for example Raspberry Pi runs in 3.3v, and its all GPIO I/O pins are at this level, even though we provide a 5v USB input. And so it is not tolerent to 5V input levels from another device or sensor modules connected to it over I/O pins using SPI, UART, i2C... whatever.... Another example is Arduino UNO which runs in 5V, normally is driving all its I/O at 5V levels.  So interfacing boards at different I/O voltage levels requires a level shifter. Simple voltage divider circuits can help for an extent.. but they dont provide low voltage  device protection or bidirectional shifting. Wait a minute ... Bidirectional... what is it ? Okie.. some communication protocols like i2C are b...
Read more

Introducing an FPGA-ARM Dev Kit for Embedded Linux Starters- Avent MiniZED Board

-
Image
Hi All ,  Welcome to another tech byte.... Embedded Linux is a very powerful area in the current age of IoT  and Edge Computing. But as an FPGA RTL person throughout the career , i had  numerous situations where had to work side by side with embedded software engineers who were  linux gurus. I have seen their struggle starting from setting up environment for development, building code , solving hardware dependencies , integrating software pieces for limited resources , cross compiling , optimising for performance so and so... Rather than few sneek peaks into their works, i have never dared myself to do a hands on into these linux stuffs.. I was pretty happy with few diagnositc linux commands which told me , yes data to and from my FPGA side is pretty solid and running.. And we had run into situations where we play "ball in your court" game  when a bug pops up from nowhere.. We blame it on software and they shout it back on RTL  :) But last project ...
Read more